The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter
designed for flow and usage monitoring applications in 1, 2 and 3 inch
pipe. The polypropylene flow tube offers corrosion resistance to a wide
range of chemicals and fertilizers. It is light weight and easy to install or
remove from the pipe for inspection.With no moving parts, the magmeter permits unobstructed flow, minimizing flow disturbances and straight pipe requirements. The WMPSeries can be used in piping configurations where there is little space
between the meter and an elbow or valve.
The WMP-Series is resistant to wear from sand and debris found in ground or surface water. Since there are no bearings or propeller to wear out, maintenance and repair
costs are kept to a minimum and it tolerates high flows without damage.A hinged polyethylene cover is included that protects from dust and UV rays, while permitting easy access to the flow rate and total display electronics housing can be fitted with cross-drilled screws and seal wire for tamper-evidence. Flow rate and total can be displayed in a variety of units, customer-selected and factory-set.
The WMP101 is externally powered via a 5-pin connector cable (20ft/6m)
which also provides pulse output for use with a variety of Seametrics and
other displays and controls for remote reading, data logging, pulse-toanalog
conversion, and telemetry applications.
The WMP104 is a battery-operated unit for use when pulse output is not required. The standard batteries are user replaceable with an approximate 1 year life depending on usage. An extended battery life option offers an estimated 2-4 year life depending on usage.
In the event of DC power loss, or when changing batteries, the WMP will retain internal settings and flow total.